Pics of cfer case hi/lo selector lockout solenoid? - Northwest Overland Society - Discussions - Vehicles

Pics of cfer case hi/lo selector lockout solenoid?

Last Post 01 Dec 2010 08:22 AM by64tbolt. 6 Replies.

Sort:

	Prev Next
You are not authorized to post a reply.

Author

Messages

Ryan Hall

Advanced Member
Posts:521

28 Nov 2010 06:27 PM
So I have the console all apart and am trying to locate the hi/lo selector lock out solenoid. I cannot seem to find it anywhere. Does anyone have any pics of said object? Quick help is greatly appreciated. Thanks

Ryan Hall

Advanced Member
Posts:521

Ryan Hall

Advanced Member
Posts:521

28 Nov 2010 07:09 PM
So never mind the pics, I have found the location. Now the problem is, I cant get to the bolts on the outside of the cover for it. Anyone have any success in this at all?

Dan Cronin User is Offline

Veteran Member
Posts:2844

29 Nov 2010 10:00 AM
I have not attempted to remove the solenoid from the installed orientation. It might be a little dodgy. You may have to resort to supporting the transfer case on a floor jack, removing the transmision mounts and lowering the case/transmission to get to the bolts.

Ryan Hall

Advanced Member
Posts:521

Tony Sims

Veteran Member
Posts:1231

30 Nov 2010 10:26 AM
What if you unbolt the xfer case mounts and trans mounts and pivot the whole lot down on the engine mounts? I'm just guessing, not something I've done, but if it gets you an inch or two you might be golden.

Ryan Hall

Advanced Member
Posts:521

01 Dec 2010 08:22 AM
Dan, would I also have to unbolt the drive shafts?

You are not authorized to post a reply.

NOT LICENSED FOR PRODUCTION USE
www.activemodules.com